Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is an innovative anti-theft system that uses modern technology to ward off car theft. This discreet device is undetectable by thieves and will only start your engine after a PIN code or app is entered.
It is weatherproof and connects to the CAN data network of your vehicle. It has a service/valet function that allows you to temporarily start your car when it is in the garage.
Easy to install
The Ghost immobiliser guards your vehicle from key theft as well as hacking, cloning and stealing. It is a unique PIN code system that is incorporated into your car's ECU that makes it impossible for thieves to spot or alter. Unlike traditional immobilisers, it doesn't require specific keys or sensors. It is completely hidden from view with no LEDs or signals to give away its presence. It is also less expensive than replacing an ECU or installing an entirely new key fob. ghost immobiliser cost could lower your monthly insurance premiums.
Follow the directions of the manufacturer when installing follow the manufacturer's instructions when installing a Ghost 2 vehicle immobiliser. This will ensure the device works correctly and effectively. Test the system after installation by entering the PIN and starting the vehicle. Regular testing will allow you to identify any issues before they become worse.
Make sure you check the position of the CAN H and L wires prior to beginning the installation. They are vital to powering the immobiliser, therefore it is crucial to ensure that they are connected correctly. Labelling the wires can help you locate them during installation. Once you have identified the locations of these wires, connect them to a permanent 12V power source as well as the grounding point. Use a fuse tap to protect the connections from short-circuits or damage.
After connecting the wires neaten the wires using cable ties to avoid potential alteration. You can also cover the connections with insulation tape or heat-shrink tubing. This will help protect them from electrical shorts, and will increase the life span of the device. It's a good idea to test your Ghost 2 immobiliser once the wiring is secure.
For situations when you need to hand over your vehicle, for example for servicing or valet parking, the Ghost 2 immobiliser has a service mode that temporarily disables the PIN code sequence. To activate this feature, press the brake pedal while holding the accelerator, a number of times that is equal to the first digit of the emergency code. The system will then go into service mode, which is confirmed by flashing the indicator signal five times.
Easy to change PIN codes
A ghost 2 immobiliser is a great way to protect your vehicle from theft. It is installed discreetly inside the vehicle, and is only accessible through a specific code. The device communicates directly with the vehicle ECU via its data bus, and does not use radio frequency signals, as do traditional Thatcham immobilisers or other aftermarket alarm systems. This makes it more difficult for thieves to detect the sound of an immobiliser relay, or to add new keys. The control unit is concealed within the vehicle's wiring harness or dashboard and cannot be physically tampered with to reset the system.
The ghost 2 immobiliser connects to the vehicle's CAN Data network. It makes use of buttons on the steering, door panels and the center console, to create a customisable series of up to twenty button presses that need to be entered to start the engine - just as a PIN. This unique system can be reprogrammed and doesn't require cutting wires during installation. You can also start your vehicle in Service or Valet mode when you give it to a mechanic to perform work.
The application can also be used to disable your PIN code in the event that you've lost your keys or change it. This feature is particularly useful in the event that you have offered your car to someone else to be used as a valet or service, as it stops them from starting your vehicle and driving it away without your permission. It's also unnoticeable by professional thieves since it doesn't make use of circuit cuts or radio frequencies.
Another benefit of the ghost 2 immobiliser is its ability to stop relay thefts. Relay theft is a popular method of car theft where the criminals hack into the diagnostic port on your car and then alter the signal that is sent by the key to the vehicle's ECU in order to fool it into thinking that the key is valid. This is the way traditional immobilisers are bypassed, but with the ghost 2 immobiliser the signal is blocked before it reaches the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that protects your car from hacking, key-cloning and key theft. It connects to the CAN data network of your vehicle and requires an PIN code to start the engine. It also deters thieves from using signal spoofing or device spoofing that are popular tactics to steal vehicles.
The system is simple to use and functions like a standard car alarm. Installing the system will allow you to create a unique 20-digit PIN code that needs to be entered before you start the vehicle. This will stop the vehicle being stolen, even if you lose your keys. If you need to disable the system, you can do so via an app on your smartphone.
The ghost is completely silent and does not emit radio frequency signals. Full Article is a weatherproof and discreet device that can be installed anywhere inside your vehicle. It can be easily hidden beneath the dash, steering wheel, or even the door panels. It communicates via the CAN data loop to your ECU and is not affected at all by the diagnostic tools used by thieves to find security systems. It is not affected by jamming devices which can spoof codes.
It is a covert system that can be used to prevent the theft of all vehicles. Its technology has been proven to be efficient, and it is in line with TASSA Standards. The ghost is a fantastic solution for classic, sports and prestige cars. It can also be used to protect vehicles that are hired out through apps such as Turo.
The Autowatch Ghost 2 is the next generation of vehicle immobilisers. The system is inaccessible to thieves, and blocks them starting your vehicle without your PIN, or unless they are authorized by the app. It does not emit radio frequencies or any other signals scanners could detect. Installation is quick and easy. The app comes with a simple interface and a simple navigation. It also comes with an GPS tracker that will help police find the vehicle and locate it.
Simple to reset
It is possible to secure your vehicle from theft by using an immobiliser that is ghost 2. It is integrated into your vehicle's ECU, creating a barrier that thieves cannot penetrate without the right pin. It's also TASSA certified, which means it's recognised by insurance companies. It's a useful tool to prevent car theft and will save you money in the long run.
The Ghost system unlike traditional alarms and immobilisers that require cutting of circuits, is directly connected to your vehicle's CAN data network. It operates by pressing the buttons on your dashboard as well as the steering wheel. You can create an individual PIN sequence that can be up to 20 presses long. This PIN needs to be entered before the engine can begin, just like a PIN on your credit card. The Ghost system is undetectable to thieves, and there are no LED indicators to make it obvious that it is there making it the most reliable aftermarket CAN bus immobiliser that is on the market today.
Another advantage of the Ghost system is that it does not utilize radio frequency signals, meaning it isn't scanned or intercepted by thieves. This stops key attacks that replicate and relay attacks, as well as the common method of hacking into the computer system of a car using its CAN bus by scanning for signals. In addition to this, the Ghost system is designed to be completely hidden in the vehicle, and there are no lights or signals to indicate its presence.
The system features an option called Transport Mode that disables the Ghost System. This is helpful in situations where you may require temporarily deactivating Ghost, such as when transporting or servicing your vehicle. However this mode isn't as efficient as Service Mode, as it does not disable the system when your vehicle speeds over 31 mph for more than 15 minutes.
You'll require the emergency number from your installer to reset your Ghost 2 immobiliser. It is usually hidden under an area for scratch-offs on the card that was provided with your installation. It is recommended to keep this emergency code safe and keep it in a safe place that is secure, such as your wallet at home.